Poulan BV1650 EN Manual de usuario descargar pdf (Pagina 4)

-- 4 --

Small

Opening

Zipper

Opening

Elbow

T ube

Rib

NOTE:

Make sureedge of the small opening

is flush against the flared area of the elbow

tube, and the rib on the elbow tube is on the

bottom.

3. Close thezipperonthe bag.Make surethe

zipper is closed completely.

4. Remove blower tube from engine.

Rib

Groove

5. Insert theelbow tube intothe blower outlet.

Make sure elbow tube rib is aligned with

the blower outlet groove.

6. Turnknob clockwise to secure elbow tube.

VACUUM TUBE ASSEMBLY

W ARNING:

Stop engine and be sure

the impeller blades have stopped turning be-

fore opening the vacuum inlet door or at-

tempting to insert or remove the vacuum or

blower tubes. The rotating blades can cause

serious injury.

1. Align the lower vacuum tube as shown.

Push lower vacuum tube into upper vacu-

um tube.

Lower Vacuum Tube

Upper Vacuum

T ube

2. Insert the tip of a screwdriver into thelatch

area of the vacuum inlet.

Latch Area

Blower

Outlet

Vacuum

Inlet Cover

Latch

Area

3. Gently tilt thehandle of the screwdriver to-

ward the back of the unit to release the

latch while pulling up on the vacuum inlet

cover with your other hand.

4. Hold the vacuum inlet cover open until up-

per vacuum tube is installed.

Vacuum Inlet

Vacuum

Inlet

Cover

Retaining Post

5. Place the hooks of the upper vacuum tube

on the retaining posts of the unit.

6. Pivot the tube until it is secured to the

blower unit by the vacuum inlet latch.

Retaining

Post

Hook

Inlet Cover

Latch

PIVOT

HOW TO CONVERT UNIT FROM

VACUUM USE TO BLOWER USE

1. Remove the vacuum tubes by inserting

the tip of a screwdriver into the latch area

of the vacuum inlet.

2. Gently tilt handle of screwdriver toward

the back of the unit to release the latch

while pulling up on the upper vacuum tube

with your other hand.

Latch Area

3. Remove the vacuum bag.

4. Close the vacuum inlet cover and make

sure it is latched closed.

5. Reinstall the blower tube (see BLOWER

TUBE ASSEMBLY).

1 2 3 4 5 6 7 8 9 10 11

Comentarios a estos manuales

Sin comentarios